Ga door naar hoofdinhoud

Tungsten T3 Motherboard Replacement

Engels
Nederlands
Stap 12
Tungsten T3 Motherboard Replacement: stap 0, afbeelding 1 van 1
  • Next, the screen must be reconnected to the motherboard.

  • Connect the new orange cable into the same location as the previous screen. (Location noted in picture by arrow). Make sure the cable is placed facing downward on the connection.

  • Lower the motherboard into place. Make sure to keep the back facing downward. Hint: This will be the side where all cables are connected.

  • Gently lay the screen on the core of the device.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.