Ga door naar hoofdinhoud
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

Remove the face plate and set aside. This will leave the core of the device in front of you.

Reminder: The core of the device will be connected by various cables. Gently lift the screen and mother board (as in picture).

As labeled in the picture, the orange screen cable will connect on the lower right side of the motherboard.

Disconnect the cable by pulling it upward from the motherboard connection. Depending on your device, it may require little to moderate force.

Carefully remove your screen.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.