Ga door naar hoofdinhoud
Help
Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Begin by removing the small piece of black foam located at the top right of the LCD screen. (Picture 1)

Remove screw which is located exactly where the black foam was. (Picture 1)

After screw is removed lift right side of LCD screen straight upward and pull to towards the right side of the camera. (Picture 2)

The LCD screen will pull out of the camera and 2 ribbon circuits will need to be detached.

Detach both by carefully pulling out of black locking mechanism. (Picture 3)

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.