Ga door naar hoofdinhoud
Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Release the tabs on each side of the RAM chip at the same time. These tabs lock the chip in place and releasing them will cause the chip to "pop" up.

Pull the chip directly out from its connector.

If there are two RAM chips installed, repeat the above procedure for the second chip.

When reinstalling the logic board, completely clean off the old thermal paste and apply a new layer on the three chips (CPU, GPU & PCH).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.