Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

Apply flux to the positive contact of the basttery on the PCB (Incidental finding is a SMD fuse F1 on this PCB)

Using desoldering braid unsolder the positive contact from the PCB.

Apply some gentle pressure with a small tool to remove the battery.

The battery should remove easily. If it does not, double check the battery contacts on the PCB to ensure they are not still connected somewhere. Another going over with the soldering iron may be required to complete that task.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.