Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 7 —

Stap type:

Sleep om te herschikken

There are three places that will have to be desoldered.

Positive battery contact

Negative battery contact

and a jumper

For the jumper the only thing required is to remove the solder between the pads.

Apply some flux to the jumper. The pliers will help to stabilize the PCB during soldering. any other means to hold it steady can be used.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.