Skip to main content
Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

If any of the adhesive strips broke off and the battery remains stuck to the rear case, prepare an iOpener or use a hair dryer to heat the rear case directly behind the battery. It should be slightly too warm to touch comfortably.

Overheating the iPhone may ignite the battery.

Flip the phone over and use a plastic card to break up any remaining adhesive behind the battery.

Do not insert your card in the area between the volume down (-) button and the top edge of the battery, or you may damage the volume control cable lying underneath.

Do not pry against the logic board or you may damage the phone.

Keep the card as flat as possible to avoid bending the battery, which may damage it and cause it to release dangerous chemicals or catch fire. Do not use any sharp tools to pry at the battery.

Alternatively, a piece of dental floss may be used to separate the battery from the rear case. A stronger alternative to dental floss is an unwound guitar string, such as a 0.009 E string from a 12-string set.

Thread the floss or string behind the upper battery corners, bring the ends together, wrap them around a folded cloth, and pull evenly.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.