Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Bewerken van stap 22 —

Stap type:

Sleep om te herschikken

Attach the other end of your new cable to the logic board where the optical drive was connected.

Carefully wrap up the extra cable and store it to the side of the hard drive.

Getting everything to fit with these particular cables is somewhat challenging. If you don't stow the cable correctly, it will prevent the case from going back on all the way, and could also damage the hard drives.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.