Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 13 —

Stap type:

Sleep om te herschikken

Install the new bold sled assembly, plunger tube and all, back into the gun.

Be careful with the trigger lock. You may have to remove it and reinstall it. Make sure you put it back exactly how you found it.

The hole in the bolt sled should drop right into the plastic peg on the cocking mechanism.

Make sure the tabs on the plunger tube are in the guide rails on the outer shell of the blaster.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.