Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Disconnect the speaker by using a spudger and lifting the connector up.

The cables run through a small notch and are glued in place.

Now is the time to check the new speaker. Connect it and turn on the OP-1 to make some sounds.

If everything is fine, pull the cables from the old speaker out of their recess.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.