Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 9 —

Stap type:

Sleep om te herschikken

After locating an auspicious looking pad, scratch it with the tip of an exacto knife until the copper is exposed.

Be extra careful with the knife; don't press hard. You might have to gently scratch the surface for half a minute for the copper to show. Practice this (and actually all parts of this repair procedure) on scrap flex cables.

Proceed to clean the pad with alcohol (not under the influence, though), and a Q-tip.

Do the same procedure for the second jumper point.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.