Ga door naar hoofdinhoud
Help
Bewerken van stap 6 —

Stap type:

Sleep om te herschikken

The shafts are held by bushings which are threaded on the outside. Nuts on the inside of the carriage hold the bushings in place.

Unscrew the bushings. You may need to hold the nuts on the inside with a finger or needle-nose pliers.

5x Slotted-head bushing, ID 0.141", threaded on outside 1/4-32, length 1/8"

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.