Ga door naar hoofdinhoud
Help
Bewerken van stap 33 —

Stap type:

Sleep om te herschikken

Continue holding the screws in place and set the circuit board on top of the battery compartment so that the two screws are fed through the holes on either side of the speaker.

Make sure that the top of the circuit board (the part that says Brain Game) lines up with the side of the battery compartment with three metal rings on the outside, as opposed to two.

Hand tighten the two nuts onto the battery compartment screws.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.