Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 5 —

Stap type:

Sleep om te herschikken

Using a fine tip on my iron , I again used a 700 degree tip , dabbed the area with liquid flux and soldered the wire to the lead and exposed trace.

When done I removed tape, cleaned flux off and trimmed wire to length.

Please Note: you must have a steady grip on your iron to attach the wire. By using a long wire, you make it easier to keep it in place as you solder and it's so thin you can remove the excess wire with little stress to the repair.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.