Ga door naar hoofdinhoud
Help
Bewerken van stap 17 —

Stap type:

Sleep om te herschikken

If you removed the wheel bearing with the brake drum, reinstall the rear hub nut.

Torque this nut to 175 ft-lbs. Failure to properly tighten this nut could lead to premature wheel bearing failure.

Reinstall the wheel bearing dust cap.

If you removed the brake drum by itself, reinstall the four retaining bolts on the back of the hub assembly.

Torque each bolt to 49 ft-lbs.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.