Skip to main content
Help
Bewerken van stap 4 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

If necessary, carefully dislodge the edge of the trackpad closest to the keyboard from its recess in the upper case by pushing it away from the brackets attached to the upper case.

Carefully push the trackpad connector and cable down through the slot cut into the upper case.

It may be necessary to use a spudger to help get the trackpad connector past the edge of the logic board.

Once the cable has been completely pulled through its slot in the upper case, pull the trackpad away from the outer edge of the upper case and remove it from the machine.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.