Repareer je spullen Gemeenschap Winkel

MacBook Unibody Model A1278 Upper Case Replacement

Terug naar de handleiding
Engels
Nederlands
Stap 4
MacBook Unibody Model A1278 Upper Case Replacement: stap 0, afbeelding 1 van 1

  • In the following steps, you will be working on your new upper case.

  • Use a Y1 Tri-wing screwdriver to loosely install the 1.2 mm set screw included with your new upper case into its tapped hole near the middle of the trackpad opening on your new upper case.

  • Only tighten it about one turn for now.

Vertaling hier toevoegen

Vertaling hier toevoegen

Vertaling hier toevoegen

Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.