Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help
Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Lift the end of the AirPort board up enough to pass over the heat sink directly behind it.

Do not lift the AirPort board too high, or you could damage the contacts or socket.

Pull the AirPort board straight out of its socket on the logic board.

There is a slightly adhesive thermal pad beneath the AirPort board. Be sure to reapply this when reinstalling the board, or transfer it to your replacement board.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.