Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Make sure that the power adapter is disconnected from the wall outlet and MacBook.

Use a pen to make a mark on the MagSafe cable about 4" (10 cm) from the MagSafe connector.

Use a pair of wire cutters or scissors to cut the cable at the mark you made about 4 inches from the MagSafe connector. Set aside the MagSafe connector wire for later.

Although the wires inside the cable are copper, they may damage some scissors. We recommend using wire cutters if possible.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.