Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

Remove the three screws with a T-9 screwdriver. (One screw is behind a small black capacitor. Its location is indicated by a yellow box as are the two uncovered screws.)

Remove the cables and ribbon cables by pulling them free. They attach the motherboard to the printer and are indicated by red boxes.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.