Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 14 —

Stap type:

Sleep om te herschikken

Remove twelve T9 security torx screws

Be careful to not lose the small metal nut under the black cover on the top left side. This nut is for one of the two long screws that hold the power supply that was removed in previous steps.

Remove six PH 0 phillips screws

Remove three PH 0 phillips screws

Remove two PH 0 phillips screws

Pull the top metal shield off of the console.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.