Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 3 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 2 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Gently pull the battery adhesive tabs away from the battery, toward the bottom of the iPhone.

To avoid tearing the adhesive strip, be careful not to pull against the battery or lower components.

Pull steadily, maintaining constant tension on the strips as they slip out from between the battery and the rear case. For best results, pull the strips at a 60º angle or less.

The strips will stretch to many times their original length. Continue pulling and re-grab the strips near the battery if necessary.

Hold down the battery with one hand as you pull, or the elastic strips may fling the battery from the phone once they're separated from the rear case.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.