Ga door naar hoofdinhoud
Help
Bewerken van stap 5 —

Stap type:

Sleep om te herschikken

To remove the mother board undo the Torx T10 screws shown in the yellow circles. (There's one behind a cable bottom right)

Hopefully I've circled them all. (undo any screw on the mother board that has a white circle printed on the board.)

Oh, you'll also have to yank out the infra-red sensor behind the Apple logo. Just pull up. It's spring loaded in there...

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.