Ga door naar hoofdinhoud
Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Tools Required: #00 Phillips-head screwdriver

Caution: The six screws removed in this step are tiny and should be placed in a secure location.

Using the #00 Phillips-head screwdriver, remove the two screws from the left side (as shown in picture 1).

Using the #00 Phillips-head screwdriver, remove the two screws from the right side of the camera (as shown in picture 2).

Using the #00 Phillips-head screwdriver, remove the two screws from the bottom of the camera (as shown in picture 3).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.