Skip to main content
Help
Bewerken van stap 8 —

Stap type:

Sleep om te herschikken

Remove the short medium screws

Remove the ground screw

Remove the heatsink screws and braces

Lift the front to remove

Do this slowly. The heatsinks are not screwed down and you may damage the fins if you use too much force.

This is the second time I've taken this apart. That's why there is no thermal paste on the chips. They do put paste on there. Too much in my opinion.

When putting back together, all the screw places are marked. If the hole doesn't have a marker, don't put a screw in it.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.