Skip to main content
Help
Bewerken van stap 2 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 12 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

In the following steps you must pull the antenna cable between the DS Lite game cartridge reader and motherboard. Pull slowly and stop when you feel resistance to avoid damaging the cable or motherboard.

Position the antenna cable with its connector facing up and away from the motherboard using a spudger to hold it down lightly in the gap between chips on the motherboard.

Slowly and carefully pull the antenna cable until the cable connector is under the DS Lite game cartridge reader.

Continue pulling the cable until the cable connector comes out from under the game cartridge reader on the right side.

When reassembling and attempting to feed the antenna cable back under the game cartridge reader, the cable may kink or become difficult to feed through. If so, try feeding a piece of thread through first; then, tie the thread to one end of the cable connector and pull it through, guiding it past any obstructions.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.