Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.
Stap 2 vertalen
Stap 2
-
Flip the logic board assembly back into the rear case to expose the Wi-Fi antenna.
-
Remove the following screws securing the antenna to the rear case:
-
Two 1.3 mm Phillips #000 screws
-
One 1.5 mm Phillips #000 screw
Je bijdragen zijn gelicentieerd onder de open source Creative Commons-licentie.