Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

View without cover.

Here is the water pump.

Water tank

Inlet, remove the two screws as it is attached to the pump

Remove these screws to free the pump. once free *carefully* cut the cable ties on the two hoses so it can be removed

Once all the lines are free you will need to un-solder the two wires attached to the pump so that it can be fully removed.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.