Ga door naar hoofdinhoud
Bewerken van stap 6 —

Stap type:

Sleep om te herschikken

If you are replacing the power & sensor cable with a new unit, use the edge of a plastic opening tool to peel the electronic power switch off its metal bracket.

Also be sure to transfer the proximity sensor foam/UV-filter adhered to the old power & sensor cable if your new one does not already come with one. It looks like a small square and can be peeled off with tweezers.

Transfer the bracket to your new power & sensor cable.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.