Skip to main content
Help
Bewerken van stap 3 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

The next few steps require the use of plastic opening tools and spudgers that will probably be destroyed in the process. Have a few spares of each tool handy.

Insert a plastic opening tool between the left edge of the front display bezel and the plastic strip attached to the rear bezel, with the edge of the tool angled toward the LCD.

Rotate the tool away from the LCD to pop the rear bezel off the tabs on the front display bezel.

Work along the left edge of the display until the rear bezel is evenly separated from the front bezel.

Freeing these tabs may require some force. Be sure to support the display assembly with your other hand to avoid putting too much strain on the hinges.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.