Ga door naar hoofdinhoud
Bewerken van stap 5 —

Stap type:

Sleep om te herschikken

Remove two small screws and washers from the left side of screen back and various pieces of tape and pull screen gently from the case. Be sure not to damage the ribbon connectors for the screen or digitizer.

Three more screws and some careful prying will separate the flimsy middle section from the digitizer. Some careful heating around the edges and the rest of the plastic will come off the other side of the plastic and that is the full disassembly.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.