Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Disassemble the new headphone jack.

Measure the inside length of the new headphone jack.

Add half an inch to the length you measured, and mark the new length on the old headphone wire.

Clamp the wire strippers around the wire where the mark is. Press tight enough to cut through the insulation but not the wire. Pull (Strip) the insulation from the mark to the cut end.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.