Ga door naar hoofdinhoud
Help
Bewerken van stap 3 —

Stap type:

Sleep om te herschikken

Locate the battery unit solder points and note where it is attached to the motherboard.

Plug in your soldering iron/pen and wait the required amount of time to heat up.

Be careful with the iron as the tip is very hot and it could burn you or the tablet

Apply a small amount of pressure with the iron on the solder points until the joints come loose and the wires move freely away from the board

Remove the battery unit

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.