Help
Bewerken van stap 4 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Locate the two ribbons connected to the camera and the LCD screen. (One is red and small and the other is wide and orange)

Remove the top left red ribbon by gripping the connector on the camera and sliding it straight out.

Remove the side orange ribbon by gripping the connector on the camera and sliding it straight out.

Note: It may be helpful to use tweezers when removing the connectors. (Pay close attention to how the ribbons are disconnected as this will help in replacing the screen later)

Note: When reassembling, use tweezers to reconnect the small red connector on the top left of the screen.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.