Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 5 —

Stap type:

Sleep om te herschikken

Unscrew all four phillips head screws in each corner (green highlight).

Disconnect power cable (yellow highlight).

Lift and remove the clear front plastic lens cover.

Lift the circuit board and camera assebly out of the case.

Carefully separate the LED assembly from the four small connectors (highlighted in blue). Note: This step is not required for this repair. However, it reduces the possibility of inadvertent damage during the process.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.