Ga door naar hoofdinhoud
Help
Bewerken van stap 3 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 5 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Use an iPod opening tool to slightly lift the edge of the logic board next to the battery enough to grab it with your other hand.

Do not excessively bend the logic board, as it is very thin and fragile.

Be very careful not to lift too much as the volume control ribbon cable is still connected and will tear very easily.

While gently lifting the logic board with one hand, use an iPod opening tool to lift the logic board near the copper tape at the logic board's top edge.

The logic board will be lifted adequately when the last display assembly connector has cleared the top edge of the rear case.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.