Ga door naar hoofdinhoud
Help
Bewerken van stap 29 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 48 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Do not attempt to fully remove the LCD. It is still connected to the iPad by several cables at the home button end. Lift only from the front-facing camera end.

Insert the flat end of a spudger under the LCD between it and the LCD shield plate and lift gently.

Be very careful not to get the spudger under the shield plate. It must be between the LCD and the shield.

Even bending the LCD slightly can permanently damage it, so be extremely careful as you lift.

There are two long thin strips of adhesive (one on either side) that run along the edges of the display.

To reduce chances of cracking the LCD the two most used methods without prying up are:

Running a thin fishing line under the display starting from the top then working your way down

Using a thin plastic card or a plastic money note to cut through the adhesive starting from the top.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.