Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 12 —

Stap type:

Sleep om te herschikken

To oscillate the mirror, alternating electrical current at high frequency is passed through a copper coil attached to the mirror. A stationary iron core is attached to the display unit, forming a solenoid to produce the motive force needed for oscillation.

To tell the oscillator circuitry how fast the mirror is moving, an arm attached to the mirror passes back and forth through an optical sensor attached to the lower circuit board.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.