Ga door naar hoofdinhoud
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

Mark the wires and note how the cables are routed, so you can return them to their original routes after disassembly.

Either apply wire labels, or take a fine-tipped permanent marker and as you disconnect each connector mark it with the two letter name of the mating socket, which you will find stamped on the plastic of the control unit's housing. A flashlight will help reading the letters along the left side of the control unit.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.