Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 13 —

Stap type:

Sleep om te herschikken

Remove the four spring-loaded screws that reside on each side of the heatsink. These screws apply pressure to the DMD board to hold it in position, under tension - once adjusted at the factory the the DMD board needs to be held in place over the long term or the picture quality will suffer.

See the springs that sit behind the screws in the second picture.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.