Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 10 —

Stap type:

Sleep om te herschikken

To allow for easier access to a number of components on the DMD board that need to be removed, first remove the black plastic lens shield. There are two Phillips screws at the top that hold this in place.

Once the screws are removed the shield can be lifted out.

Be careful not to touch the lens.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.