Ga door naar hoofdinhoud
Bewerken van stap 1 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden de handleiding die deze stap bevat.

Stap type:

Sleep om te herschikken

Orient the scooter so that the front wheel is facing you. Observe the right and left side of the wheel. Remember which is which throughout the guide.

Using an Allen wrench, unscrew the axle bolt slowly from the right side while applying a constant pressure with your hand on the left side of the bearing.

If the left side of the bolt turns while you unscrew the right side, you will need to use a second Allen wrench to prevent it from moving

If the bolt does not move at all, or moves very little, try applying a lubricant on as much of the screw as possible and try again in 5 minutes.

Carefully pull apart the bolt and bearing from either side of the wheel.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.