Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 1 —

Waarschuwing: Je bewerkt een vooraf vereiste handleiding. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Use a heat gun to soften the adhesive underneath the camera/microphone cover.

Pry the camera/microphone cover off the case with a metal spudger and remove it.

It is extremely difficult, if not impossible, to avoid damaging the iPod case near the camera. While this will not affect the iPod's functionality, it will hurt its cosmetic appearance.

You can try this alternative method for removing the cover:

Use a hot glue gun to apply a bead of glue across the cover.

Move the nozzle in the glue for 20 seconds to heat the lens adhesive holding the lens in place.

Press a spudger into the hot glue and hold it in place until the glue cools and hardens.

Pull on the spudger with firm steady force, while using a fingernail to pry on the cover edge.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.