Ga door naar hoofdinhoud

Fix Your Stuff

Right to Repair

Parts & Tools

Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Remove following six screws securing the LCD to the rear display bezel:

Four 3.4 mm Phillips.

Two 3 mm Phillips.

Do not try to remove the LCD yet. The circuitry along its lower edge is wedged in a gap along the lower edge of the display recess in the plastic display assembly.

Hold the display vertically and tip it enough to grab the top edge of the LCD and rotate it slightly out of the display assembly, being careful not to break the circuitry off its lower edge.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.