Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 6 —

Stap type:

Sleep om te herschikken

The next few steps will require you to separate the LCD from the adhesive applied to the upper and lower edges of the front bezel.

The adhesive is applied such that it sticks to a thin steel strip around the perimeter of the LCD. When prying your LCD away from the front panel, be sure you are separating the front panel from the steel strip on the LCD.

Use the flat end of a spudger to gently lift one of the top corners of the LCD out of the front bezel.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.