Ga door naar hoofdinhoud
Help
Bewerken van stap 1 —

Waarschuwing: Je bewerkt nu een vooraf vereiste handleiding van de handleiding die je net bekeek. Alle wijzigingen die je hierin maakt, beïnvloeden alle 3 handleidingen die deze stap bevatten.

Stap type:

Sleep om te herschikken

Remember to check that all the PCI Express cards have been removed and properly stowed.

Note: The heatsink cover is held in place by a number of tabs and magnets on the underside of the cover. You must release the tabs before you can remove the cover from the enclosure.

Place the fingers of one hand under the lip of the heatsink cover nearest the logic board. Lift the lip slightly toward the media shelf to release the tabs and magnets under the top face of the cover.

With your fingers still under the cover’s bottom lip, lift the cover straight up to release the remaining tabs and magnets under the front face of the cover

Remove the cover from the enclosure.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.