Ga door naar hoofdinhoud
Help
Bewerken van stap 11 —

Stap type:

Sleep om te herschikken

Place the red probe on the positive terminal, and the black probe on the negative terminal.

If your range was set too high, you may not get a very accurate reading. Here the multimeter reads 9 volts. That's fine, but we can turn the dial to a lower range to get a better reading.

If you set the range too low, the multimeter simply reads 1 or OL, indicating that it is overloaded or out of range. This won't hurt the multimeter, but we need to set the dial to a higher range.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.