Skip to main content
Help
Bewerken van stap 4 —

Stap type:

Sleep om te herschikken

The multimeter tests continuity by sending a little current through one probe, and checking whether the other probe receives it.

If the probes are connected—either by a continuous circuit, or by touching each other directly—the test current flows through. The screen displays a value of zero (or near zero), and the multimeter beeps. Continuity!

If the test current isn't detected, it means there's no continuity. The screen will display 1 or OL (open loop).

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.