Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help
Bewerken van stap 1 —

Stap type:

Sleep om te herschikken

Remove the four 6 mm screws that secure the button controller PCB to the rest of the device; you will need a Phillips #2 driver for this task.

Note: Since the main board is on top of this PCB, you may need to move the main board out of the way to access the screws.

Lift the PCB away from the rest of the device.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.