Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie


Bewerken van stap 2 —

Stap type:

Sleep om te herschikken

With the battery removed, you can begin removing the outermost screws from the camera to allow for case replacement, while keeping track of where each screw comes from. There are (5) screws in total. This will require a Philips head # 00 screwdriver.

There are (2) screws located on the left side of the camera. These screw locations are depicted with the red circle markings in the second photo of this step. These screws are 2 mm long.

Je bijdragen zijn gelicenseerd onder de open source Creative Commons licentie.